Quinton Picco i-Size · Black
i-Size newborn carrier —
birth to 87 cm · 13 kg lightweight, stroller-ready
The Quinton Picco i-Size infant carrier is an ECE R129/04 certified rearward-facing car seat with three-point belt installation or optional ISOFIX base — engineered for Singapore's carpark-to-lift-to-footpath journeys without waking a sleeping newborn. Lift out and go in one move. Compatible with Quinton Roxy, Nior, and On The Go strollers via model-specific adapters. Suitable from birth to 87 cm and 13 kg, weighing just 3.8 kg — Singapore's most portable i-Size infant carrier solution.
Safety standard
ECE R129/04 i-Size
Child fit
Birth – 87 cm · 0–13 kg
Installation
Vehicle belt or ISOFIX base (add-on)
Product weight
3.8 kg
Stroller fit
Roxy · Nior · On The Go
Usage guide
3 yrs mechanism →
Travel system
Quinton Picco i-Size — Carrier and Stroller Combinations
Choosing how your infant carrier fits into your daily routine is just as important as choosing the colour. The Quinton Picco i-Size is available in Black. Use the swatches below to preview the Picco alone or installed on the Quinton Roxy autofold stroller, Nior two-way facing stroller and On The Go strollers — so you can see exactly how it looks before it arrives at your door. Every combination carries identical ECE R129/04 i-Size certification and Quinton's full manufacturer warranty. Each stroller requires its specific adapter — add the correct adapter set for your chassis at quinton.sg before checkout.
Compliance & support
Quinton Picco i-Size infant carrier certification & warranty
The Picco i-Size infant carrier is built to a verified safety standard — not just a claimed one. This section covers what ECE R129/04 i-Size certification actually means, how to correctly install the Picco in Singapore vehicles, and what happens if your carrier is ever involved in a road accident.
Certification
The Picco is type-approved under ECE R129/04 i-Size (UNECE Regulation 129) — the strictest European child seat standard, requiring mandatory side-impact crash testing and rearward-facing use within the seat's certified height and weight envelope. The Picco is approved rearward-facing from birth to 87 cm and 13 kg. The optional ISOFIX base is a separate type-approved product — use only the base and carrier combinations Quinton sells as a matched set. ISOFIX installation must reference Quinton's approved vehicle list and your vehicle manual for permitted use modes.
Child fit summary
Use your child's current height and weight to confirm the Picco is the correct fit. Adjust the headrest as your baby grows to keep the harness at shoulder level at all times.
| Fit | Detail |
|---|---|
| Direction | Rearward-facing only (type-approved) |
| Stature / mass | Birth to 87 cm · max. 13 kg |
| In the car | Vehicle 3-point belt · optional ISOFIX base (paired set) |
Carrier weight 3.8 kg — available in Black. Covers are detachable and hand wash recommended. In Singapore's humidity, air-dry all parts fully before reassembly.
Warranty & crash replacement
The Quinton Picco i-Size infant carrier carries a 3-year manufacturing warranty — one of the strongest coverage periods available for i-Size certified infant carriers in Singapore. Quinton also backs every carrier with a 1-to-1 crash replacement programme: if your Picco is involved in any road accident, contact Singapore support with proof of purchase and a brand-new Picco i-Size is dispatched to you, regardless of visible damage. To claim, email support@quintonbaby.sg or call +65 8910 1088, Monday to Friday, 9 AM–6 PM.
Standard
Picco i-Size car seat R129/04 standard
Light & i-Size
3.8 kg shell weight keeps transfers easy. ECE R129/04 i-Size rearward-facing approval to 87 cm / 13 kg gives a clear growth ceiling.
Singapore-ready comfort
Breathable soft-touch fabric, memory foam newborn support, Y-harness, and an adjustable canopy for bright cabin light.
Three-chassis travel system
Picco mounts on Roxy, Nior, and On The Go with model-specific adapters — pick the adapter that matches your stroller at checkout.
Why Choose
What defines the Picco i-Size car seat
Car seat R129/04 i-Size certification
Picco carries ECE R129/04 i-Size approval rearward-facing from birth to eighty-seven centimetres and thirteen kilograms, giving families a clear certified ceiling before the next upgrade.
3.8 kg carry weight
Weighing only three point eight kilograms, Picco eases repeated lifts from vehicle to pavement and keeps one caregiver comfortable during busy carpark and lift-lobby transfers.
Belt or ISOFIX base
Use the type-approved vehicle belt wherever the shell fits, or add the optional Quinton ISOFIX base for repeat installs on short trips and school runs.
Car seat stroller compatibility
Dock Picco on Roxy, Nior, or On The Go with matching adapters, linking car and stroller use without waking baby between carpark and sidewalk transitions.
Memory foam & Y-harness
Memory foam supports newborns while the Y-harness spreads restraint evenly across the torso, helping caregivers achieve a snug fit before every journey across Singapore roads.
Canopy & breathable fabric
The canopy blocks harsh side sun while breathable fabric moves air on skin, helping babies stay cooler through hot Singapore afternoons and bright carpark walks.
One-button headrest
One-button headrest moves harness height upward with growth, keeping shoulder straps correctly placed without re-threading belts through slots after each rapid growth spurt at home.
Curved base · rocking
The curved base rests steady on firm floors, rocking gently when paused to soothe fussy babies before lifting the carrier toward car or home again.
Highlights
The Quinton Picco i-Size infant carrier — ECE R129/04 certified, built for Singapore's carpark-to-lift-to-footpath journeys
The Quinton Picco is an ECE R129/04 certified rearward-facing infant carrier weighing just 3.8 kg — suitable from birth to 87 cm and 13 kg. Install with the vehicle three-point belt in any compatible rear seat, or add the optional Quinton ISOFIX base for click-in daily use. Compatible with Quinton Roxy stroller, Nior two-way facing stroller, and On The Go strollers via model-specific adapters for a complete travel system from birth.
Why is the Quinton Picco i-Size infant carrier so light?
At 3.8 kg the Picco is one of Singapore's lightest ECE R129/04 certified infant carriers — designed so carpark, lift, and stroller handoffs feel manageable on busy Singapore mornings without straining your back or waking a sleeping newborn. The curved base rocks gently on firm ground, so you can set the carrier down between handoffs without disturbing your child.
Can I use the Picco infant carrier with or without an ISOFIX base?
Yes. The Picco installs in any compatible vehicle rear seat using the vehicle three-point belt — no ISOFIX base required. Add the optional Quinton ISOFIX base for faster click-in and click-out daily use when you want simpler loading on the school run or in tight Singapore HDB carparks. The ISOFIX base is a separate type-approved product — use only base and carrier combinations Quinton sells as a matched set.
Which Quinton strollers are compatible with the Picco infant carrier?
The Picco i-Size infant carrier is compatible with three Quinton stroller chassis — the Roxy, Nior, and On The Go — using model-specific adapters. Each chassis requires its own adapter set — confirm which adapter matches your stroller model and add it to your order at quinton.sg before checkout. Compatibility is with Quinton-matched sets only — third-party adapter combinations are not type-approved.
Guides
Quinton Picco i-Size infant carrier installation guide for Singapore
These steps cover everything Singapore families need to install the Picco i-Size infant carrier correctly — vehicle three-point belt installation, optional ISOFIX base setup, and daily carry checks. Always follow your Quinton instruction manual and the labels on your carrier and vehicle for your specific installation. Every car model fits differently — the steps below show the method, your manual confirms the fit for your vehicle.
How do I install the Quinton Picco i-Size infant carrier with the vehicle seatbelt?
Belt installation is available in any compatible rear seat position — no ISOFIX base required. This makes the Picco suitable for older Singapore-registered cars, MPVs, Grab and Gojek vehicles, and any rear seat without ISOFIX anchors.
- Position the carrier — place the Picco rearward-facing on an approved rear seat position. Check your vehicle manual to confirm which rear seat positions are approved for infant carrier use. In Singapore's most common family cars — Toyota Alphard, Honda Freed, and most SUVs — rear outboard seats are typically the approved positions.
- Set the carry handle — move the carry handle to the correct travel position as shown in your Quinton manual before routing the belt. Never drive with the carry handle in the carrying position.
- Route the belt — thread the vehicle three-point lap-and-shoulder belt through the marked belt paths on the Picco shell. Follow the colour-coded belt routing in your Quinton manual exactly — incorrect routing is the most common installation error on infant carriers.
- Remove all slack — pull the belt tight through the routing channel until there is no excess slack. The belt should lie flat and taut with no twists.
- Lock the retractor — engage the vehicle seatbelt retractor lock as your manual instructs for your vehicle type. A locked retractor prevents the belt from extending in a collision.
- Final check — press down firmly on the carrier and confirm it does not move more than 2–3 cm side to side. Check harness height is correctly set for your baby's current size before every journey.
Always confirm the belt routing path is correct for your vehicle and seat position in your Quinton manual before every installation. Incorrect belt routing significantly reduces crash protection.
How do I carry the Quinton Picco i-Size infant carrier safely in Singapore?
Lift the Picco using the carry handle only — never carry by the harness straps or canopy. At 3.8 kg plus your baby's weight, use both hands for longer carries between Singapore carparks, lifts, and stroller handoffs. The curved base rocks gently on firm, flat ground — useful for settling a newborn between handoffs without placing the carrier on an uneven surface. Always switch the carry handle back to the travel position before installing the carrier in a vehicle.
Watch
Quinton Picco i-Size infant carrier video guide — belt installation, ISOFIX base setup and stroller compatibility
Watch the official Quinton Picco i-Size walkthrough covering vehicle three-point belt installation, optional ISOFIX base click-in setup, harness fitting from birth, carry handle positions, and stroller compatibility with the Quinton Roxy, Nior, and On The Go — demonstrated on vehicles and strollers commonly used by Singapore families.
Compare
Quinton Picco i-Size Infant Carrier vs Other Infant Carriers
| Feature | Quinton Picco i-Size | Other infant carriers |
|---|---|---|
| Safety cert | ECE R129/04 i-Size Latest Most current amendment — mandatory side-impact testing and height-based sizing from birth to 87 cm |
Often ECE R44 or R129/02 Older standards — less stringent side-impact criteria, weight-based sizing on R44 models |
| Suitable from | From birth to 87 cm and 13 kg From birth Certified rearward-facing from newborn — no minimum weight or age restriction within the certified range |
Some from 3 months or 3.5 kg minimum Many rival carriers have a minimum weight threshold — not suitable from day one without an additional insert |
| Carrier weight | 3.8 kg Lightweight One of Singapore's lightest ECE R129/04 certified infant carriers — carpark, lift, and stroller handoffs without straining your back |
Typically 4–6 kg Heavier carriers make lift-out and carry significantly harder on busy Singapore mornings with a sleeping newborn |
| Installation | Vehicle three-point belt or optional ISOFIX base Flexible Belt install suits any compatible rear seat — add optional Quinton ISOFIX base for faster click-in daily use in Singapore HDB carparks |
Belt-only or proprietary base required Many rival carriers require a brand-specific base for ISOFIX — base often sold separately at additional cost |
| Stroller compatibility | Quinton Roxy, Nior and On The Go Travel system Docks on three Quinton stroller chassis via model-specific adapters — complete travel system from birth without transferring your baby |
Brand-specific compatibility only Most rival carriers are compatible with their own brand strollers only — cross-brand travel systems rarely type-approved |
| Comfort features | Memory foam insert, Y-harness, adjustable canopy Breathable upholstery manages Singapore's year-round humidity — curved base rocks gently on firm ground between handoffs |
Basic padding on budget models Memory foam and adjustable canopy not standard on most rival infant carriers at this price point |
| Harness | Y-harness with one-button headrest height adjustment Headrest adjusts as baby grows through the certified 40–87 cm range — no tools required |
Fixed or manual harness adjustment One-button headrest adjustment not standard — rivals often require re-threading at each stage |
| Carry handle | Ergonomic carry handle with travel position lock Rocks gently on firm ground when set down — useful for settling newborns between Singapore carpark, lift, and stroller handoffs |
Fixed handle — no rocking base Most rival carriers do not have a rocking curved base — cannot be set down without a separate rocker accessory |
| Warranty | 3 years on manufacturing defects Full manufacturer warranty from date of purchase |
Typically 1–2 years Coverage terms and conditions vary by brand |
| Crash replacement | Lifetime 1-to-1 crash replacement Lifetime Free replacement carrier for the lifetime of the product with proof of purchase — no quibble, no charge, regardless of visible damage |
Programmes vary or absent Most rival infant carriers offer no crash replacement programme — lifetime coverage extremely rare in this category |
─ Customer Reviews ─
Quinton Picco i-Size Infant Carrier Reviews: What Singapore Families Say
Verified 5-star feedback from Singapore families sharing what they love most about the Quinton Picco i-Size infant carrier — lightweight carry, travel system compatibility, and stress-free handoffs on real Singapore daily journeys
★★★★★
"I'm really satisfied with the Quinton Maple 360 car seat from the Baby Expo. The product on display feels solid and well made, and the team explained the features clearly. Overall it's a good experience and we feel confident using it."
★★★★★
"Just purchased a baby car seat from Quinton at the Baby Expo in Mid Valley Megamall and had a great experience. The staff were very patient, knowledgeable, and explained the features clearly without being pushy. The car seat feels solid, well-made, and gives me confidence in terms of safety and comfort for my baby. Highly recommended for parents-to-be."
★★★★★
"My kids have been growing up with each of them safely secured in a Quinton car seat, and I couldn't be more impressed. This car seat is very comfortable, high quality materials and offer excellent safety features. They are best car seat I've ever owned."
─ Frequently asked questions ─
What Singapore parents ask about the
Picco i-Size car seat
Q1: Is the Quinton Picco i-Size infant carrier ECE R129/04 certified?
Yes. The Quinton Picco i-Size infant carrier is certified to ECE R129/04 — the most current i-Size amendment, requiring mandatory side-impact crash testing and height-based sizing from birth. The Picco is approved for rearward-facing use from birth to 87 cm and 13 kg. Many rival infant carriers sold in Singapore carry only R129/02 or the older R44 certification — always check the approval label on the carrier before buying.
Q2: Do I need the ISOFIX base for the Quinton Picco i-Size infant carrier?
No. The Picco i-Size infant carrier installs securely in any compatible rear seat using the vehicle three-point belt alone — no ISOFIX base required. The optional Quinton ISOFIX base speeds up click-in and click-out daily use when you want faster loading in Singapore's tight HDB carparks and multi-storey mall lots. The ISOFIX base is a separate type-approved product — use only the base Quinton lists as approved for the Picco. Never use the Picco on a third-party or non-matched base.
Q3: Which Quinton strollers are compatible with the Picco i-Size infant carrier?
The Quinton Picco i-Size infant carrier is compatible with three Quinton stroller chassis — the Roxy stroller, Nior stroller, and On The Go stroller. Each chassis requires its own model-specific adapter kit — the Roxy, Nior, and On The Go each use a different adapter. Confirm which adapter matches your stroller chassis and add it to your order at quinton.sg before checkout. Use only Quinton-matched adapter sets — third-party adapter combinations are not type-approved for the Picco.
Q4: How much does the Quinton Picco i-Size infant carrier weigh?
The Quinton Picco i-Size infant carrier weighs 3.8 kg — making it one of Singapore's lightest ECE R129/04 certified infant carriers. At 3.8 kg plus your baby's weight, the Picco is designed so carpark, lift, and stroller handoffs feel manageable on busy Singapore mornings without straining your back or waking a sleeping newborn. The curved base also rocks gently on firm flat ground so you can set the carrier down between handoffs without disturbing your child.
Q5: Where can I buy the Quinton Picco i-Size infant carrier in Singapore?
The Quinton Picco i-Size infant carrier is available at quinton.sg with doorstep delivery across Singapore. Shipping fees and delivery timelines are shown at checkout before payment. The Picco is also available through authorised Quinton retail partners — check quinton.sg for your nearest Singapore stockist. For product questions or stroller adapter advice before you buy, contact Singapore support at +65 8910 1088, Monday to Friday, 9 AM–6 PM, or email support@quintonbaby.sg.
Q6: What warranty does the Quinton Picco i-Size infant carrier include?
The Quinton Picco i-Size infant carrier carries a 3-year manufacturer warranty covering manufacturing defects from date of purchase. Quinton also provides a lifetime 1-to-1 crash replacement programme — if your Picco is involved in any road accident, contact Singapore support with proof of purchase and Quinton will replace the carrier with a brand-new unit, regardless of visible damage. To claim, email support@quintonbaby.sg or call +65 8910 1088, Monday to Friday, 9 AM–6 PM.
Q7: Can I use the Quinton Picco i-Size infant carrier in a Grab or Gojek vehicle in Singapore?
Yes. The Picco installs in any compatible rear seat using the vehicle three-point belt — making it suitable for Grab, Gojek, and private hire vehicles where ISOFIX may not be available. Singapore's Road Traffic Act requires all children under 1.35 m to use an approved child restraint in private hire cars the same way it applies to personal vehicles. Bring the Picco with you and install using the belt routing in your Quinton manual before the journey begins. The ISOFIX base is not required for belt-only installation.
Q8: How do I fit the Quinton Picco i-Size infant carrier harness correctly?
Set the Y-harness straps so they sit at or just below your baby's shoulders — never above. Use the one-button headrest height adjustment to raise the harness as your baby grows through the certified 40–87 cm range. The harness should be snug with no excess webbing pinchable at the shoulder — fasten the chest buckle at armpit level. Check harness height and snugness before every journey. Babies grow quickly — what fits correctly today may need adjusting within weeks.
Q9: Can I use the Quinton Picco i-Size infant carrier in a Toyota Alphard or Vellfire in Singapore?
Yes. The Picco i-Size infant carrier is compatible with the Toyota Alphard and Vellfire — two of Singapore's most popular family MPVs — via the vehicle three-point belt on the second-row seats. If your Alphard or Vellfire has ISOFIX anchors on the second row, add the optional Quinton ISOFIX base for faster click-in daily use. Check your vehicle owner's manual to confirm approved rear seat positions for infant carrier use. Always perform a physical fit check before your first journey.
Q10: When should I move from the Quinton Picco i-Size infant carrier to an all-stage car seat?
Move your baby from the Picco i-Size infant carrier to an all-stage car seat when they reach the Picco's certified limit of 87 cm or 13 kg — whichever comes first. Most babies outgrow an infant carrier between 9 and 12 months depending on growth rate. For a seamless transition, the Quinton SpinGuard 360, WoWo 360, and Maple 360 are all ECE R129 i-Size certified all-stage car seats covering birth to approximately 12 years — visit quinton.sg to compare all three.
Explore More
See the full Quinton Baby range for Singapore families